Veterinary Monitor MVTM-701 features a vibrant 12.1-inch TFT LCD display, providing clear visualization of real-time data. It offers high accuracy across all measurements, such as ECG heart rate detection from 15 to 350 bpm with ±1 bpm precision, and SpO₂ accuracy of ±2 percent within the 70 to 100 percent range. This device is equipped with both sidestream and mainstream EtCO₂ capabilities, ensuring flexible respiratory monitoring. Its automatic and continuous NIBP measurements, along with robust safety features like over-pressure protection, enhance reliability. This monitor is ideal for veterinary clinics requiring precise, efficient, and versatile patient monitoring solutions.
| Display | 12.1-inch TFT LCD display |
|---|---|
| Patient Range | Horse, cattle, dog, cat, etc. |
| ECG Lead Mode | 5-lead (R, L, F, N, C) |
| ECG Lead Selection | I, II, III, aVR, aVL, aVF, V |
| ECG Waveform | 3 and 7 channel selectable |
| ECG Gain Selection | 0.5mm/mV, 1mm/mV, 2mm/mV |
| ECG Sweep Speed | 12.5mm/s, 25mm/s, 50mm/s |
| ECG Heart Rate Range | 15 to 350 bpm |
| ECG Accuracy | ±1 bpm or ±1% |
| ECG Resolution | 1 bpm |
| ECG Filters | Surgery: 120Hz Monitor: 0.540Hz Diagnostic: 0.05 to 130Hz |
| ECG Scaling Signal | 1mV ± 3% |
| ECG Electrical Protection | Withstands 4000VAC / 50V isolation |
| ECG Alarm Range | 15 to 350 bpm |
| ST Segment Measurement | ±2.0mV |
| ST Segment Accuracy | ±0.8mV |
| ST Segment Alarm Range | -2.0mV to +2.0mV |
| SPO2 Measurement Range | 0% to 100% |
| SPO2 Resolution | 1% |
| SPO2 Accuracy | ±2% (70% to 100%) |
| SPO2 Alarm Range | 0 to 100% |
| Pulse Rate Range | 20 to 300 bpm |
| Resolution | 1 bpm |
| Pulse Accuracy | ±1 bpm or ±2% |
| RESP Method | Thoracic impedance |
| RESP Range | 7 to 150 rpm |
| Apnea Alarm | 10 to 40 s |
| RESP Resolution | 1 rpm |
| RESP Accuracy | ±2 rpm |
| NIBP Method | Digital Automatic Oscillometric |
| NIBP Modes | Manual, Automatic, Continuous |
| Auto Measurement Time | Adjustable (1 to 480 min) |
| NIBP Units | mmHg / kPa selectable |
| NIBP Measurement Types | Systolic, Diastolic, Mean |
| Systolic Pressure Range | 40 to 270 mmHg |
| Mean Pressure Range | 20 to 235 mmHg |
| Diastolic Pressure Range | 10 to 215 mmHg |
| NIBP Resolution | 1 mmHg |
| NIBP Alarms | Systolic, Diastolic, Mean |
| NIBP Safety | Double safety protection Over-pressure protection |
| NIBP Storage | 1000 groups |
| Alarm Storage | 200 groups |
| Full disclosure waveforms | 1 hour |
| Trend Storage | 1s/piece: 8 hrs 1min/piece: 168 hrs 5min/piece: 1000 hrs |
| IBP Channels | 2 channels |
| IBP Measurement Range | 50 to 300 mmHg |
| IBP Resolution | 1 mmHg |
| IBP Accuracy | ±4 mmHg (±4%) |
| IBP Unit | mmHg, kPa |
| Converter Sensitivity | 5 mV/V/mmHg |
| IBP Transducer Sites | ART, PA, CVP, LAP, RAP, ICP |
| EtCO₂ Type | Sidestream CO₂ |
| EtCO₂ Measurement Range | 0 to 99 mmHg |
| EtCO₂ Accuracy | ±2 mmHg (0 to 40 mmHg) |
| EtCO₂ Sampling Range | 100 ml/min |
| EtCO₂ Sampling Rate Accuracy | 15% |
| EtCO₂ Respiration Rate | 0 to 120 rpm |
| EtCO₂ Respiration Accuracy | ±2 rpm (0 to 70 rpm), ±5 rpm (>70 rpm) |
| EtCO₂ Respiration Time | < 240 ms (10% to 90%) |
| EtCO₂ Delay Time | < 2 seconds |
| Mainstream EtCO₂ Method | Infrared Spectrum |
| Mainstream EtCO₂ Range | 0.0 to 10% (0 to 76%) |
| Mainstream EtCO₂ Resolution | 1 mmHg (0.1%) |
| Mainstream EtCO₂ Accuracy | ≤5% (±4.0 mmHg) or ≤10% of readings |
| Recorder Type | Built-in thermal array |
| Plethysmogram Channels | 2 channels |
| Record Modes | Manual, On alarm, Time-defined |
| Recording Width | 50 mm |
| Printing Speed | 50 mm/s |
| Temperature Probe | YSI or CYF |
| Temperature Range | 5°C to 50°C |
| Temperature Resolution | 0.1°C |
| Temperature Accuracy | ±0.1°C |
| Temperature Refresh Time | About 1s |
| Temperature Measuring Time | <10s |
| Working Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 15% to 95%, non-condensing |
| External Power Supply | 100 to 240V AC, 50/60 Hz |
| Internal Battery | Rechargeable Li-ion 12V/4AH, Max 24H charging, 4H working |
Our Veterinary Monitor MVTM-701 is specifically designed to provide comprehensive and accurate monitoring for a wide range of animal patients, including horses, dogs, cats, and other similarly sized animals. It is ideally suited for use in veterinary clinics, animal hospitals, mobile veterinary units, and research institutions.
Accessories Name Quantity 5 lead ECG Cable (12PIN) 1pc Blood Pressure Cuff and Extension Cable 1pc Digital SPO2 Sensor 1pc Interior Temperature Sensor 1pc ECG Electrodes 6 pcs Monitor Power Supply Cable 1pc Ground Wire 1pc
